These nema17 motors are 12 volt motors and have small dimensions.
THE MOTORS ARE WITHOUT WIRES, YOU NEED TO SOURCE THEM YOURSELF!
Phase: 2 Phase
Step Angle: 1.8 ± 5%
Current: 0.4 A/Phase
Resistance: 30 Ohm ± 10%
Inductance: 37 mH ± 20%
Holding Torque: 2.60 Kg.cm
These pre-wired nema17 with spindle motors are the ideal motors to build your own 3D printer.
They can be used for the Z axis. The motors have a spindle with trapezium thread.
These pre-wired nema17 motors are the ideal motors to build your own 3D printer.
They can be used for all the axis (X, Y and Z) or for the extruder. The motors have a flat on the shaft so that you can fix the pulleys on them.