You can use this power cord to connect your power supply.
This is an important USB cable for Arduino fanciers.
It's needed to connect your Arduino or Arduino Mega with your computer.
Length: 50 cm
Type: A to B
You can use this cable to extend the USB cable from your arduino.
Lenght: 5 meter
These wires are used to connect the electronics from your printer.
8x 3 PIN cables for endstops (each 1 m long)
5x 2 PIN cables for thermistors (each 1 m long)
7x 4 PIN cables for motors (each 1 m long)
LOUDSPEAKER WIRE - RED/BLACK - 2 x 2.50 mm² - 1 m
size: 2 x 2.50 mm²
inner conductor CU: 0.19 mm x 88 x 2
outside Ø: 3.5 mm x 2 – PVC
length: 1 m
This wire can be used for powering all the parts on your printer. The wire is coated so that it can be used in hot and warm environments.
Wire for connecting the thermistor to the electronics.
Conductor material: Tinned copper
Insulation Material: FEP
Insulation wall thickness: 0,25 mm
Maximum operating temperature: + 250 °C
Insulation wall thickness: 0.4 mm
10 colors: black, blue, brown, green, grey, orange, purple, red, white and yellow